"The Signature Service"

"If you're ready to invest into the value and protection of your vehicle, this is the service you'll want."

The Signature Service is not an ordinary, quick, or simple detailing package. It includes the highest levels of Detailing - Paint Correction and Ceramic Coating protection for interior and exterior surfaces. The end result is a protected vehicle that will look new for years and years to come.

*WARRANTY* - Warranty for ALL Ceramic Coatings is provided.

SERVICE TIME : ~ 5 Days (Per Vehicle) + 24-48 hours Cure Time

PRICING : Pricing varies based upon vehicle size and current condition. *In-person Vehicle Inspection REQUIRED. 

2ND VEHICLE INSPECTION

The 1st vehicle inspection was done prior to service and deposit has been confirmed.

A second vehicle inspection is necessary to ensure I understand the true condition of all surfaces of the vehicle. This inspection is done once all surfaces have been cleaned and any protection, oils etc. have been removed and no longer "mask" the surface. With a special light, I will look for manufacturer defects, scrapes, tears, un-done seat stitching, holes, scuffs, panel alignment, gaps, cosmetic issues. Any issues/defects noticed will be photographed, documented and shared with owner at that time.

PAINT DEFECTS : Scratches, wash marks, scours, scrapes, factory sanding marks, water spots, micr-marring, bird poop etching, tar, deep scratches/scrapes.

INTERIOR DETAIL & INTERIOR COATINGS

Vacuuming/dusting gets completed first. All mats are removed from vehicle and cleaned accordingly and then dried.

I utilize a steam cleaner for interior surfaces because it deep cleans, but there's not a big need to physically rub the surfaces over and over. This reduces the potential for scuffs or scouring. If the interior is very dirty, then I will do a more aggressive deep clean for the specific surfaces.All surfaces will get cleaned, and then conditioned and air dried. 

All windows get a streak-free finish.

After every surfaces is cleaned and dried, the Coating application will start. Each Coating is applied then cured for a specific amount of time and that process is repeated until all layers are applied. A total of three layers for all surfaces is done.

SIGNATURE WASH & PAINT PREP

Any type of protection that is on the vehicle can get in the way of the Paint Correction process. What do I mean by this? When protection isn't fully removed and you correct/polish the surface, the protection can hinder the look of the vehicle. Sometimes creating a hazy or cloudy outcome. Not only does the overall look become affected, but old protection left on a vehicle can hinder the bonding process of the new protection. This means longevity suffers greatly and the user experience won't be what it should be. This is the main reason vehicle preparation is crucial.

The process of prepping a vehicle for Paint Correction is vitally important. The time for this specific portion of the service can be anywhere from one hour upwards of two hours per vehicle. Time depends on vehicle size and condition.

PAINT CORRECTION : CUT/BUFF

Manufacturers are using less paint than ever before on vehicles. It does vary from manufacturer, but because of this sometimes Paint Correction can be very finicky. A lot of variables are at play when using a machine polisher, and then you include paint hardness, liquids, pads etc. I won't get into it, but it can definitely be a rabbit hole!

When you Paint Correct or in general Polish, you are actually removing microns of clear-coat to level the surface. A leveled surface brings the most shine and that "wet" look.

My Process : "Remove as many defects as possible, while ensuring I leave as much paint still on the vehicle. Sometimes I do have to push the limits for that "Car Show Winning" look."

BEFORE PAINT CORRECTION

AFTER PAINT CORRECTION

CERAMIC COATING APPLICATION

THE END RESULT....